The Federal Aviation Administration has paused installation of new Juniper routers after a telecommunications failure led to a nearly five-hour nationwide ground stop Friday, the agency confirmed Tuesday.

The FAA said it believes it addressed the initial cause by disabling functionality on the originating routers. As a precaution, it also disabled the same functionality on more than 60 other Juniper routers and paused further installations.

The failure followed routine work to modernize the FAA’s aging telecommunications network by replacing copper wires with fiber-optic connections. After a router was installed, the system was overwhelmed by roughly 1,000 connection attempts every four to five seconds, disabling communication and radar in 17 of the country’s 22 regional air traffic control centers.

More than 12,000 flights were canceled Friday and thousands more were delayed. Travel disruptions continued through the weekend. Investigators identified two potential sources of the problem, one in Arkansas and another in Texas. The FAA is still investigating the root cause.

Hewlett Packard Enterprise, which owns Juniper, said the device functioned as programmed by the installer and was not faulty. The FAA said: “We believe we have addressed the initial cause of the disruption by immediately disabling the functionality of the originating Juniper routers,” and, “As a precaution, we disabled the same functionality on more than 60 other Juniper routers in the system, and we have paused installing them.”

The pause followed a Tuesday request from a group of Democratic senators for the FAA to halt router installations. It was unclear whether the senators’ request prompted the decision or whether the agency had paused installations before receiving their letter to Transportation Secretary Scott Duffy and FAA Administrator Bryan Bedford.

“DOT, FAA and OMB must provide Congress with a complete account of what happened and how additional funding would address the vulnerabilities presented on November 13,” the senators wrote. They added: “Congress deserves clear answers on how the FAA is ensuring the safety of the aviation system for the traveling public while these new systems are being deployed.”

“Modernization cannot come at the expense of operational safety,” the senators wrote, adding that identifying the problematic router is not the same as determining why it malfunctioned. The senators, all members of the Senate Committee for Commerce, Science and Transportation, requested responses to their questions by no later than Nov. 23.

The FAA plans to replace more than 3,600 routers with Juniper devices, and 400 have been installed, according to the senators’ letter. Just 69 are operational. The FAA did not respond to Axios’ request for comment.